S-250/50 manual bordering (flanging) machine

S-250/50 manual bordering
(flanging) machine

S-250/50M motor-powered bordering (flanging) machine

The machine body is formed by a robust casting (odlitek). The shafts are placed in single-lubrication bearings, which reduce friction and maintenance requirements.

At customer's request the machine can be equipped with an SO-1 dismountable stand and RS-800 circular guidance serving to cut out circles up to 800 mm in diameter.

Technical data
	Shaft distance	50 mm
	Working depth	250 mm
	Maximum metal sheet thickness at strength of 380 MPa	1 mm
Forming roundlets	Mass	28 kg

This is a motor-powered version of the S-250/50 machine. The machine is powered with a two-revolution motor (3x400V/50Hz) with the revolution reversion effected by means of a twin foot pedal.

Technical data
	Shaft distance	50 mm
	Working depth	250 mm
	Maximum metal sheet thickness at strength of 380 MPa	1 mm
	Two-revolution motor power	0.3/0.43 kW
	Operating speed	5.5/11 m/min
	Mass	55 kg
Forming roundlets

Je to motorizovaná verze stroje s-250/50. Stroj je poháněn dvouotáčkovým motorem (3x400V/50Hz) s reverzí otáček pomocí dvojité šlapky.